Category: TY1DP1

Work by Part 1 students as part of their ‘Design Practice’ module.

The Signs of COVID-19

Today we were told to source signs made about COVID-19, signs made online, around us, at campus, homemade, government made and even asked if we had made anything ourselves. During lockdown I was bored and spent a lot of time on walks, and when doing so I would look for homemade signs around my town, so already had a few of these. I also found signs in our halls, on our stairs, our pin board, around reception. Then looked for government official posters, and NHS ones online, finding a wide range in total of things to look at and observe.

One key thing I noticed was the use of yellow, red and black colours, to draw attention and for a high level of contrast. Red and yellow are all associated with danger and warning signs so its easy to recognise. The use of bold founts and capitals letters was also very common, and the people sign(you see at airports and on toilets) with arrows between them, keeping them apart, recognising it as being government official from just the people sign, and a visual short hand communication that tells the public to all keep a distance from another.

A key point that we talked about in the class after as well was the lack of imagery on the posters, and how they were so impersonal. Compared to for example the packing for smoking, where they show coughing up blood, blackened lungs, and a baby inhaling smoke, the covid-19 posters showed very few side effects, no emotive imagery, no one ill or in pain or dying. Which did relate with how many people also feel, as if the situation hasn’t been taken seriously enough, the posters also correlate with that feeling, where they blend into road signs and street signs, they are so easy to walk past that they give no sense of danger anymore, and don’t properly symbolise the severity of the situation.

I did in my own time an illustration of an image during lockdown, of a husband and wife, both nurse anaesthetics getting ready for a shift with COVID-19 patients on the airway team. In the image they are both geared head to toe in plastic, and masks, and screen, and gloves, and holding on to another’s faces to say their goodbye, and good luck, right before their shift. The image for me struck how hard it must have been for your loved one to be sent to work, and to not know if they were going to get ill, how long they’d be ill for, and if they’d, like many others, be a number on the news death toll later that month. I can’t imagine how so many families managed to cope with isolating from loved ones for months on end for their job, and the awful things they would’ve had to see at their work, and the conditions that the NHS staff must have been put through. Wearing a mask, and keeping a distance, should be encouragement enough for people to comply with guidelines, and I wish they had used much more emotive tactics, in their signs, cause signs can be so powerful, to make more people take the situation much more seriously.

 

Sharp Objects (and a dangerous penguin)

I chose to recreate the front cover for one of my favourite books, being ‘Sharp Objects’ by Gillian Flynn, the book is an excellent read, dark, twisted and clever. The line on the front of the book I even love ‘This family isn’t nuclear, its toxic’. It’s a fun play on word with ‘nuclear family’ and chose it for my design. I changed the colouring of the book to green, to try and go for that slightly toxic look, however, wish I could have gotten the colour a bit more acidic looking, but still wanted it to fit with the classic penguin look. I chose to change the bottom short green line to two knifes, a very simple design, just adding in the ‘sharp objects’, and if you look closely you can see that the penguin himself is holding a tiny knife behind his back, all connecting to books name and story.

The Handmaid’s Tale

After creating a replica of the penguin classics edition of ‘The Great Gatsby’ (pictured below), we were given the task to create our own book cover following the basic principles of the classic penguin format but deviating from this slightly in order to create some kind of symbology/irony within the cover.

I chose the book ‘The Handmaids Tale’ as this is a book I enjoyed reading and feel as though is an appropriate title for a classic style penguin cover. I knew that I would use the colour red as this is symbolic for the book in that the dresses the handmaids wear are red. I also wanted to use white as this is the colour of their bonnets. I wanted the book cover to resemble the identity of the books main character. My first Idea is pictured on the left below, I switched the cartouche shape, that penguin covers use, to two shapes that create the image of a face and a bonnet in the style that the handmaids wear. I wasn’t overly pleased with the outcome of this so I decided to get rid of this and return back to the cartouche shape and work within this shape to create some imagery. I created a simple eye shape within the cartouche as there is lots of imagery throughout the book to do with ‘the eye’ and being watched. I kept it all red so the eye is slightly hidden (just like it is in the book). I used three colours to represent the white bonnet, a shade of colour to represent the characters skin and red to represent the dress. I felt that this three part background didn’t work well for the cover so I eventually settled on using white for the middle and upper section to allow for contrast against the title text and also to resemble the white of the Handmaid’s Bonnet.

 

    

Psycho

This was my first time using Indesign, I found it interesting how you can attach certain elements to text (in this case, lines) that would move with the text depending on what was written. I decided to base my second Penguin cover off the 1960 psychological horror Psycho. I played around with different ideas at first, for instance adding blood splatters across the cover or some sort of water damage effect to highlight the shower scene but I ended up going with a much more subdued look, just adding some drips down the title (although I am worried this makes it look slightly tacky and halloween-ish). I also changed all the colours to greyscale because the film is in black and white.

The Borrowers

Before this project, I’d used InDesign before, but I wasn’t aware of the depth of control that it offered. There is definitely a lot to learn here and I think it will be hard to remember all the tips and tricks, especially for text layout. Moving forward thought, I’m definitely interested to see how much can be accomplished on this software. The book I chose to redesign was ‘The Borrowers’ by Mary Norton. I’d certainly like to think my design doesn’t need an explanation!

Bang! And The Dirt Is Gone!

As part of the TY1INT1 module, we were asked to explore Adobe InDesign and create our own Penguin Book covers inspired by a book, movie or quote. I landed on the idea of the cleaning products Cillit Bang which are manufactured by Reckitt Benckiser. I used the colour palette from the limescale remover range to design my book cover. These bright purples and oranges allowed me to create an eye-catching and bold design. I wanted to stray from the simple lines and shapes used in classic Penguin Books, and so I came up with the idea of using an almost star-like, explosion shape to highlight the ‘title’ and ‘author’ of my book.  Below is my initial sketch which I used to plan out my ideas.

I am new to all Adobe apps, so this was a fun experience, trying out the tools available to create each element of my book cover. I am pleased with my final outcome, however there are a few areas that I could improve on. I look forward to gaining a better understanding of InDesign and other Adobe apps in the future.

Blood Orange

I found this session interesting and it refreshed my knowledge on how to use indesign. The one part I struggled with was the penguin book logo. I found it hard to make the curve of the ovals. Which I have gone over by re watching the video from that day.

For my messed up book I chose blood orange, as it is my most recent read book. I kept the layout the same as the original penguin books and altered the other elements. The changed the font to Chalkduster to create a horror effect. Although I would never use this typeface again as it just wrongs all the Typography rules on so many levels. I used neon pink as my colour as original penguin uses neutral respectable colours, so thought it would create more fun. I lastly changed the colour of the penguin symbol to a space galaxy effect. Just to add to the fun quirkinesses of this new cover.

Harry Potter

 

Having never used Indesign before, after completing this task, I have learned a range of fundamental skills needed to work the software effectively. As well as following the tutorial, when I was not able to do something, I researched alternative ways in doing the same thing. Photoshop is a program I have used before which has been an advantage as I was able to transfer some of the skills I’d known from there onto this task. One of the main skills I learned was how leading and tracking makes a big difference in organising and keeping your titles and headings separated proportionally. Although I did find it difficult at times, I managed to distort the typical Penguin cover into a book from a series I LOVE!

The Shining

PENGUIN BOOK COVER

In James’ lesson we followed a tutorial on how to recreate a penguin book cover. I used in design to create both of these covers, in the lesson i learned how to use some of in designs tools as the program is new to me. I learned how to group shapes together and how to manipulate parts of type such as the kerning and the height. In my version of the book cover i choose to represent the movie/ book ‘The Shining’ by Stephen King, i followed the same tutorial and layout we had used in class for the new design. I featured some of the films well known quotes such as ‘Here’s Johnny’ ‘Redrum’ and ‘all work and no play makes jack a dull boy’. I changed the opacity of ‘Redrum’ to 21% so it would be easier to see the title and author of the book, i also gave the penguin an axe as it was an iconic item in the film. I also learned how to change the direction of text as well as make certain objects different colours.